Best Sellers
- Opto-Isolation Input Module (Ref: VO1C)
- LED Display module (Ref: VD1)
- Standard Netiom (Ref: Netiom-std)
- EMACSYS Output Terminal (Ref: EM-OPT)
- EMACSYS Input Terminal (Ref: EM-IPT)
- EMACSYS Ethernet Module (Ref: EM-Eth10)
Welcome to Phaedrus
|
Best Selling Items
Opto-Isolation Input Module The Optoisolation Input Module connects directly to the digital inputs of our range of VIOM, NETIOM and EMACSYS products. It has 8 optoisolators for systems which require a high level of isolation and noise immunity. Two versions are available, one with a common optoisolator supply rail, the other with each optoisolators supply separate. Connection to the module is via a 10 way ribbon connector (provided) which carries the eight output lines plus power. | LED Display module The LED Display Module connects directly to our range of VIOM, NETIOM and EMACSYS products. It has 8 x 3mm red LEDs. Connection to the module is via a 10 way ribbon connector (provided) which carries the eight output lines plus power. | Standard Netiom Standard Netiom with web page access, email and TCP client modes. Control of I/O does not need any special software - any browser can be used. | ||
EMACSYS Output Terminal This module is usually used as an output connector although it equally suitable for use with single-ended inputs, such as logic levels. Each output has a single terminal with the ground line brought out as a referance. | EMACSYS Input Terminal Usually used as an input connector this module has two terminals for each input, one connected to the input, the other to the ground line. This makes the module suitable for inputs using clean switch or relay contacts. | EMACSYS Ethernet Module This module brings 10Base-T ethernet connectivity to the EMACSYS system. Connection to the EMACSYS Control module is via a 10 way ribbon cable (supplied). Status of the ethernet connection is shown on the yellow and red LEDs mounted on the RJ45 ethernet connector. For applications requiring web pages a 128 MByte EEPROM is provided. | ||